YENEPOYA INSTITUTE OF TECHNOLOGY
NBA-Accredited : B.E (CSE & ME)
(Approved by AICTE, New Delhi, Affiliated to Visvesvaraya Technological University, Belgavi)
Course Details
.jpg)
MECHANICAL ENGINEERING
Mechanical Engineering department is fully equipped with the required facilities for effective delivery of lectures, state of the art computational facilities and laboratory facilities. More emphasis is being given to practical classes through effective, elaborate and rigorous laboratory classes to reinforce the theoretical knowledge gained during theory classes.
Vision
To strive to impart outstanding education and training aspirants into qualified mechanical engineers who are equipped to serve the globally challenging diverse needs.
Mission
1. To support students with enriching education towards achieving the desired expertise in Mechanical Engineering..
2. To maintain state of the art laboratory facilities so as to provide a collaborative environment that inspires faculty and students with opportunities to design, analyze, apply and disseminate knowledge.
3. To create opportunities and guide students in attaining career oriented skills in the field of Mechanical Engineering.
4. To educate students about professional & ethical responsibilities and train them to build leadership and entrepreneurship qualities for their career development.
The department of Mechanical Engineering has been recognized for excellence in academics and research. Being one of the largest departments in the institute, it is continuously striving to improve the quality of education, academics and industry oriented research as well as consultancy work with service to the society.
Academic course work and projects are designed to endow students with the ability to apply knowledge of science mathematics and engineering. With a solid grounding in the principles and practice of mechanical engineering, our students are ready to engage in ethical approaches to engineering with concern of society and the environment.
.jpg)
Dr. Sathisha N
Designation : HOD Mechanical Engineering
Qualification : B.E, M.Tech, Ph.D, MISTE
View Profile
Dr. Ravindra Ishwar Badiger
Designation : Associate Professor
Qualification : BE, M.Tech, Ph.D
View Profile
.jpg)
Mrs. Vani R
Designation : Assistant Professor
Qualification : B.E., MSc Engg.,(Ph.D), MISTE
View Profile
Mr. Anfas Mukram
Designation : Assistant Professor
Qualification : BTech, M.Tech, (Ph.D)
View Profile
.jpg)
Mr. Ravindra Naik
Designation : Assistant Professor
Qualification : B.E, M. Tech,(Ph.D)
View Profile
 (1).jpg)
.jpg)
Mr. Puneeth S
Designation : Assistant Professor
Qualification : B.E , M.Tech, MISTE ( Ph.D)
View Profile
.jpg)
.jpg)
Mr. Prasanna Shankara R
Designation : Assistant Professor
Qualification : BE, M. Tech, MISTE (PhD)
View Profile
.jpg)
Mr. Laxmi Shivaram Prasad
Designation : Assistant Professor
Qualification : BE, M. Tech
View Profile
.jpg)
.jpg)
.jpg)
.jpg)
Ph.D Research Supervisors
|
Sl. NO |
Research Supervisor |
Research Scholars |
University |
|
1 |
Dr Sathisha N |
05 |
VTU |
|
2 |
Dr Ravindra I Badigar |
00 |
VTU |
Details of Ph.D. Pursuance
|
S. No |
Name |
Register Number |
Month and Year of Registration |
Supervisor Name |
University |
Research Area |
|
1 |
Mr. Anfas Mukram T |
15PHD1078 |
Dec 2015 |
Dr. Joseph Daniel |
VIT Chennai |
Solar passive cooling |
|
2 |
Mr. Ravindra Naik |
1SV16PMJ03 |
June 2016 |
Dr. Sathisha. N |
VTU Belagavi |
Hybrid Machining |
|
3 |
Mrs Vani R |
4SU17PMA01 |
June 2017 |
Dr. Girishkumar |
VTU Belagavi |
Material Science |
|
4 |
Mr. Prasanna S R |
01PE17RME004 |
Oct 2017 |
Dr. Nagaraj Banapur Math |
KLE Technological University, Hubli |
Nano fluids |
List of publication
SCOPUS/SCI Indexed and UGC Care recognised journals
|
Publication Year 2021 |
|||||
|
Sl. No |
Author Name |
Paper Title |
Name of the Journal/Conference /Event/Publisher Vol. No., Issue, pp |
Year |
DOI/ISSB/ISSN |
|
1 |
Thippeswamy J C, Dr. Sathisha N |
Fabrication and Characterization of Aluminum 8011 Alloy and nano Zro2 Metal Matrix Composite |
IOP Conf. Series: Materials Science and Engineering 1065 (2021) 012023 |
2021 |
doi:10.1088/1757-899X/1065/1/012023 |
|
2 |
Sadashiv Bellubbi, Sathisha Nanjundaswam, Bijan Mallick |
Multi Response Optimization of ECDM Process Parameters for Machining of Microchannel in Silica Glass Using Taguchi–GRA Technique |
Silicon |
2021 |
-- |
|
3 |
Sadashiv Bellubbi, Maheshwar A Hipparagi, Ravindra Naik, Sathisha N |
Optimization of process parameters in Electro Chemical Discharge Machining of silica glass through Analysis of Means |
IOP Conf. Series: Materials Science and Engineering 1065 (2021) 012003 |
2021 |
10.1088/1757-899X/1065/1/012003 |
|
4 |
D Kari Basavaraja, C Sowmya, Ravindra Naik |
Experimental analysis of Fracture Toughness of EN9 and EN31 Steel under double layer of electroplating materials with different varied thickness |
IOP Conf. Series: Materials Science and Engineering 1065 (2021) 012012 |
2021 |
doi:10.1088/1757-899X/1065/1/012012 |
|
5 |
Susilendra Mutalikdesai, Vani R, Arpan Bhandari, Aishwarya Jain Y |
MECHANICAL CHARACTERIZATION OF MMT NANO CLAY/EPOXY/ BASALT FIBER COMPOSITES |
IOP Conf. Series: Materials Science and Engineering 1065 (2021) 012026 |
2021 |
doi:10.1088/1757-899X/1065/1/012026 |
|
6 |
Vani R, Arpan Bhandari, Aishwarya Jain Y |
Inhibition Effects of Banana and Orange Peel Extract on The Corrosion of Bright Steel in Acidic Media |
IOP Conf. Series: Materials Science and Engineering 1065 (2021) 012029 |
2021 |
doi:10.1088/1757-899X/1065/1/012029 |
|
7 |
Ravindra I Badiger, Ajit M Hebbale, M Manjaiah, Gajanan M Naik |
A Comparative Study on Characteristics of Inconel-625 Joints Developed through Microwave Hybrid Heating and Tungsten Inert Gas Welding |
Transactions of the Indian Institute of Metals, Springer India |
2021 |
Doi:10.1007/s12666-021-02188-8 |
|
8 |
JS Vishwanatha, Ajit M Hebbale, Nithin Kumar, MS Srinath, Ravindra I Badiger |
ANOVA studies and control factors effect analysis of cobalt-based microwave clad |
Materials Today: Proceedings. Publisher: Elsevier |
2021 |
https://doi.org/10.1016/j.matpr.2021.01.214 |
|
9 |
T. Anfas Mukram, Joseph Daniel |
A review of novel methods and current developments of phase change materials in the building walls for cooling applications |
Sustainable Energy Technologies and Assessments |
2021 |
https://doi.org/10.1016/j.seta.2021.101709 |
|
Publication Year 2020 |
|||||
|
Sl. No |
Author Name |
Paper Title |
Name of the Journal/Conference /Event/Publisher Vol. No., Issue, pp |
Year |
DOI/ISSB/ISSN |
|
1 |
Y. Nagaraj, N. Jagannatha, N. Sathisha, S. J. Niranjana |
Prediction of Material Removal Rate and Surface Roughness in Hot Air Assisted Hybrid Machining on Soda-Lime-Silica Glass using Regression Analysis and Artificial Neural Network |
Silicon
|
2020 |
|
|
2 |
Sadashiv Bellubbi, Ravindra Naik, N. Sathisha |
An experimental study of process parameters on material removal rate in ECDM process |
Materials Today: Proceedings |
2020 |
|
|
3 |
M. Sunil Kumar, N. Sathisha, Batluri Tilak Chandra |
A study on effect of chill casting on A356 reinforced with Hematite metal matrix composite |
Materials Today: Proceedings |
2020 |
|
|
4 |
Anfas Mukram T, Joseph Daniel |
Building bricks with PCM inserts for Passive cooling applications |
IOP Conference Series: Earth and Environmental science |
2020 |
1757-899X |
|
5 |
Anfas Mukram T, Joseph Daniel |
Heat transfer analysis of building brick filled with microencapsulated phase change material |
AIP Conference Proceedings |
2020 |
|
|
6 |
G Sujaykumar, Vani R |
Investigation of temperature on solar chimney efficiency |
AIP Conference Proceedings |
2020 |
2236, 030011 |
|
7 |
Gajanan M Naik, Sachin B, Ravindra Badiger, Ajith M Hebbale |
Microstructure and Mechanical properties of TiO2 Reinforced ZA22 Metal Matrix Composite |
Materials Today Proceedings |
2020 |
https://doi.org/10.1016/j.matpr.2020.01.529
|
|
8 |
Prasanna S R, NR Banapurmath, Abhinandan D Souza |
Experimental investigation of enhanced cooling performance with the use of hybrid nanofluid for automotive application |
IOP Conf. Series: Materials Science and Engineering 872 (2020) |
2020 |
1757-899X |
|
9 |
Ramesh S Bhat, K B Manjunath, Prasanna S R |
Electrochemical studies on the corrosion resistance of Zn–Ni–Co coating from acid chloride bath |
Applied Physics A Material Science and Processing |
2020 |
|
|
10 |
Gajanan M Naik, Anjan B S, Ravindra Badiger, Sadashiv Bellubbi |
An investigation on effects of wire-EDT machining parameters on surface roughness of Inconel-718 |
Materials Today Proceedings |
2020 |
|
|
11 |
Ajith M Hebbale, Ravindra Badiger, Srinath MS, Gajanan M Naik |
An experimental investigation of microwave developed nickel based clads for slurry erosion wear performance using Taguchi approach. |
Metallography, Microstructure and Analysis |
2020 |
|
|
12 |
K Anand Babu Sachinkumar, M Nagamadhu, Ravindra I Badiger |
Analysis of effect of friction stir welding parameters on joint hardness and tensile strength of AA3003/SiC composites |
Journal: Materials Today Proceedings Publisher: Elsevier |
2020 |
https://doi.org/10.1016/j.matpr.2020.10.106 |
|
13 |
M. Satyendra Kumar, K Latha Shenoy, GB Praveen |
PWM techniques to power converters of the wind energy conversion system
|
IEEE International Conference on communications systems and network techniques |
2020 |
10.1109/CSNT.2020.30 |
|
14 |
Ajit M Hebbale, JS Vishwanatha, MS Srinath, Ravindra I Badiger |
Dry Sliding Wear Performance Studies of WC–12Co Deposited on AISI 420 Steel Through Microwave Energy |
Advances in Lightweight Materials and Structures, Springer, Singapore |
2020 |
DOI: 10.1007/978-981-15-7827-4_49 |
|
15 |
Ravindra Badiger, Narendranath S, Srinath MS Ajith Hebbale |
Effect of power input on metallurgical and mechanical characteristics of Inconel-625 welded joints processed through microwave hybrid heating. |
Transactions of the Indian Institute of Metals. 2019, 72(3) 811-824. |
2020 |
0972-2815 / 0975-1645 |
|
Publication Year 2019 |
|||||
|
Sl. No |
Author Name |
Paper Title |
Name of the Journal/Conference /Event/Publisher Vol. No., Issue, pp |
Year |
DOI/ISSB/ISSN |
|
1 |
Y. Nagaraj, N. Jagannatha, N. Sathisha |
Hybrid Non-conventional Machining of Glass - A Review |
Applied Mechanics and Materials (Volume 895) |
2019 |
1662-7482 DOI: 10.4028/www.scientific.net/AMM.895.8 |
|
2 |
Ravindra I Badiger, S Narendranath, MS Srinath, Ajit M Hebbale |
Effect of power input on metallurgical and mechanical characteristics of Inconel-625 welded joints processed through microwave hybrid heating |
Transactions of the Indian Institute of Metals |
2019 |
https://doi.org/10.1007/s12666-018-1537-z |
|
3 |
Ravindra I Badiger, S Narendranath, MS Srinath |
Optimization of process parameters by Taguchi grey relational analysis in joining Inconel-625 through microwave hybrid heating |
Metallography, Microstructure, and Analysis |
2019 |
https://doi.org/10.1007/s13632-018-0508-4 |
|
Publication Year 2018 |
|||||
|
Sl. No |
Author Name |
Paper Title |
Name of the Journal/Conference /Event/Publisher Vol. No., Issue, pp |
Year |
DOI/ISSB/ISSN |
|
1 |
Anfas Mukram T, Joseph Daniel |
Thermal analysis of PCM integrated building blocks for passive cooling application |
IOP Conference Series: Materials Science and Engineering |
2018 |
1757-899X |
|
2 |
Ravindra Badiger, Narendranath S, Srinath MS |
Optimization of parameters influencing tensile strength of Inconel-625 welded joints developed through microwave hybrid heating |
Materials Today Proceedings 2018 (5);7659-7667, |
2018 |
2214-7853 |
|
3 |
CJ Vishwas, LV Girish, Gajanan M Naik, B Sachin, Abhinaba Roy, BY Prashanth, Ravindra Badiger |
Effect of Machining Parameters on Surface integrity during Dry Turning of AISI 410 martensitic stainless steel |
IOP Conference Series: Materials Science and Engineering |
2018 |
1757-8981 |
|
4 |
Nagaraj Kinnal, G Sujaykumar, Steevan W. D'costa, G S Girishkumar |
Investigation on Performance of Diesel Engine by using Waste Chicken Fat Biodiesel |
IOP Conference Series: Materials Science and Engineering |
2018 |
1757-899X |
|
5 |
Sadashiv Bellubbi and N Sathisha |
Reduction in through put time of drum shell manufacturing by single-V welding configuration |
IOP Conference Series: Materials Science and Engineering |
2018 |
1757-899X doi:10.1088/1757-899X/376/1/012104 |
|
6 |
Susilendra Mutalikdesai, Gururaj Hatti |
Fabrication and Mechanical Characterization of Glass fibre reinforced Epoxy Hybrid Composites using Fly ash/ Nano clay/ Zinc oxide as filler |
IOP Conference Series: Materials Science and Engineering |
2018 |
1757-899X |
|
|
Ravindra Badiger, Narendranath S, Srinath MS |
Optimization of process parameters by Taguchi grey relational analysis in joining Inconel-625 through microwave hybrid heating. |
Metallography, Microstructure and Analysis. 2019, 8(1) 92-108. |
2018 |
2192-9262 |
Research Paper/Book Publications:
|
Sl. No |
Author |
Research paper Title |
SCI Journal |
Citation |
Book /Book Chapter |
Year |
|
1. |
Ravindra I Badiger |
Effect of ECAE Die Angle on Microstructure Mechanical Properties and Corrosion Behaviour of AZ80/91 Magnesium Alloys |
- |
- |
Book chapter |
2020 |
|
2. |
Ravindra Badiger, Ajit Hebbale, Srinath MS |
Erosion resistant clad development through microwave energy |
Lambert |
|
Book |
2020/7
|
Student Association Name: Metallons
The Mechanical Engineering Students Association METALLONS of YIT aims to play a pivotal role in the development of students as engineers by various out-of-curriculum and extracurricular activities. METALLONS aims to inculcate among its members an awareness and appreciation of the various disciplines of not just Mechanical Engineering but also other relevant fields. By way of its activities METALLONS aims to be a platform for all the students of YIT in general and particularly of the students of Mechanical Engineering department
“METALLONS”, a Greek word meaning working with metals, is an association of Mechanical Engineering students, aims to play a vital role in the overall personality development of students by organizing various co-curricular and extracurricular activities, hence training them to face the cutting edge of future global challenges comfortably. It encourages the students to showcase their budding hidden talents and innovative thinking capability by inculcating among its members awareness, knowledge and appreciation of various other relevant fields other than Mechanical Engineering.Various programs organised by “METALLONS” include technical talks by guests, students seminar, students technical paper presentation, quiz competition, debates on various issues, Mock Interview, Workshops on recent technologies, Industrial training, Inter branch YPL matches, cultural activities, final year project exhibition, entrepreneurship training and Sayonara – a farewell function to final year students. In this way “METALLONS” aims to provide a platform to all the students of YIT, especially to the students of Mechanical Engineering department.
Department Activities for Academic year 2021-2022:-
|
Event Name |
Date |
Resource Person |
Organization |
|
Three day Workshop on “Entrepreneurship Awareness Camp(EAC)” |
25th to 27th Oct, 2021 |
Mr. Anil G Nayak, Managing Partner, Nayaks Rolling Shutters and Engineering Works, Mangalore |
Under the aegis of National science & technology Entrepreneurship development board (NSTEDB) , Department of science and technology, Govt. of India, New Delhi. |
|
‘Yenyojana’ mini Project exhibition-2021 |
10th November 2021 |
Judges for the mini Project exhibition-2021:- Prof.Manjunath Raikar,CSE Dept |
YIT, Moodbidri. |
Department Activities for Academic year 2020-2021:-
|
Event Name |
Date |
Resource Person |
Organization |
|
Three Day Faculty Development Programme on “MODELLING OPTIMIZATION & ANALYSIS OF ENGINEERING PROBLEMS USING SOFT COMPUTING TECHNIQUES” |
30th March -1st April 2021 |
Dr.Vijay G S and Dr. Siddappa I B, Associate Professor, Department of Mechanical & Mfg.Engg. MIT, Manipal |
MIT,MANIPAL |
|
Webinar on “What industry needs from Engineering Graduates” |
18th May 2021 from 11AM-1PM |
Speaker : Mr.Vinay S,Manager – Education &training (Conceptia Konnect) |
Conceptia Konnect,Bangalore |
|
International Conference on Frontiers in Engineering Science and Technology (ICFEST-2020) |
18th and 19th December 2020 |
Inaugural speech and keynote address was delivered by Dr. S A Khan, Professor, Department of Mechanical Engineering and International Islamic University, Malaysia. |
YIT, Moodbidri. |
Department Activities for Academic year 2019-2020:-
|
Event Name |
Date |
Resource Person |
Organization |
|
Two day workshop on “3D Printing and Design” |
19th and 20th September 2019 |
Mrs Vani & Mr Jaganesh G C , Assistant professor,YIT and Mr Shashank Gowda ,Director ,Invihub Techno Solutins Pvt LTd |
Invihub Techno Solutins Pvt LTd |
|
Two day workshop on “Geometric Dimensioning and Tolerancing” |
26th to 27th May 2020 |
Mr. ASHWIN ROYSTON LOBO, CADMAXX SOLUTIONS PVT |
CADMAXX SOLUTIONS PVT |
|
Seminar on “Intellectual Property” |
5th Sep 2019 |
Dr Purushothama Chippar.Associate Professor,Department Of Mechanical Engineering, SJEC,Mangalore |
SJEC,Mangalore |
|
Seminar on “Defence Science & Technolgy advancement in india” |
24th Sep 2019 |
Mr Jayaprakash Rao K Zonal Chairman,public relations Council of india South |
YIT, Moodbidri. |
|
Technical Talk on “Failure Analysis of Industrial Components” |
07th August 2019 |
Dr. Sudhakar Vadiraja,Professor, Montana Tech University, USA |
Montana Tech University, USA |
|
Five days Faculty Development Program on “Research Tools & Techniques” |
27th -31st January 2020 |
First day-Design of Experiments-Dr Shreeranga Bhat. Second day-Intelligent Optimization Algorithm-Dr S R Karnik Third day-Optimization tools: Particle sworn Optimization-Dr R S Kadadevaramath /Literature review to Problem statement formulation & writing an Impacting journal paper-Dr R G D’Souza Fourth Day-Artificial Neural network-Dr Srikanth Prabhu Fifth Day-Research Skills-Dr Sreenivasa C G |
Indian Society for Technical Education |
|
Poster making competition on “Drug Abuse Prevention” |
28th to 30th June 2020 |
Co-ordinators Prof. Vani R, Prof. Sushilendra R M Convener: Dr. Sathisha N Prof & Head , Department of Mechanical Engineering |
YIT, Moodbidri. |
Department Activities for Academic year 2018-2019:-
|
Event Name |
Date |
Resource Person |
Organization |
|
Workshop on “Awareness program on Aerospace and defence” |
5th September 2018 |
Prof.Ramesh Kumar and Mr. Debasiah Acharya, A&D Bengaluru |
K-tech Centre of Excellence in Aerospace & Defence,Bangaluru |
|
Two day workshop “Matlab , Condition Monitoring and About higher Education in Foreign Countries” |
3rd and 4th of October 2018 |
Dr Mahantesh Nadakatti, Dr Arun Kumar P Gogte Institute of Technology, Belgaum 590008 |
Gogte Institute of Technology, Belgaum |
|
Two day Workshop on “Metal joining Process” |
8th & 9th January 2019 |
Prof Susheelendra , YIT Moodbidri |
YIT ,Moodbidri |
|
Two day workshop on “Composite Materials, Metal casting and Waste to energy Conversion” |
27th and 28th March 2019 |
Prof. Vani R,Prof Susheelendra R M and Prof. Sujaykumar, YIT Moodbidri |
YIT ,Moodbidri |
|
Workshop on Entrepreneurship Program |
15th April 2019 |
Dr. Chidanand Gavimath, Special Officer, EDC VTU &Dr. Balasubramani, Chief Coordinator, EDC, NMAMIT, Nitte |
Entrepreneurship Development Cell |
|
Technical talk on “FEM and its applications” |
7th September 2018 |
Dr.Sudheer M, Head of the department, SJEC Vamanjoor |
SJEC Vamanjoor |
|
Technical talk on “Advanced Welding Technologies” |
19th March 2019 |
Mr. Abhay Pai, Fronius India Private Limited, Bangalore |
Fronius India Private Limited, Bangalore |
|
National Conference on Recent Advances in Mechanical Engineering and Technology (NCRAMET-19) |
29th and 30th April 2019 |
Chairperson:- 1. Dr. Manjaiah ,Assistant Professor, Department of Mechanical Engineering MIT,Mainpal 2.Dr. Basavarajappa Y H ,Professor and Head, PES Institute of Tecnology and Management, Shimoga 3. Dr. T K Chandrashekar, MITE, Mangaluru 4.Dr. Satyanarayan, Sr.Associate Professor, ALVA'S INSTITUTE OF ENGINEERING & TECHNOLOGY, Moodabdri |
|
|
One Day Industrial Visit for second year students |
20th and 21st of February 2019. |
|
Lamina Suspension Pvt.Ltd, Baikampady |
|
One Day Industrial Visit for second year students |
20th and 21st of February 2019. |
|
GTTC Mangalore |
Department Activities for Academic year 2017-2018:-
|
Event Name |
Date |
Resource Person |
Organization |
|
Two day Workshop on “Finite Element Analysis & Computational Fluid Dynamics” |
09th -10th March 2018 |
Mr Kiran s Hubballi, Director engineering & Mr Shivanand Gudadinni ,Project Manager ,Fluid Mech Solutions Pvt Limited, Bangalore |
Fluid Mech Solutions Pvt Limited, Bangalore |
|
Seminar on “Heating and Air conditioning current Scenario and Future Trends” |
12th April 2018 |
Mr Nishan Addas,Technical Director, Spectra Advanced Engineering & MEP |
Spectra Advanced Engineering & MEP |
|
Technical Talk on “Industry expectations and choosing their career” |
4th November 2017 |
Mr U Rajnikanth , Head of Learning and Development Function, MCF |
MCF,Managluru |
|
Technical Talk on “Introduction to composite structures and FEM analysis” |
8th April, 2017 |
Dr. Shravan Kumar Kerur, Professor, Department of Mech. Eng. BEC Bagalkot |
BEC Bagalkot |
|
Technical Talk on “Job Opportunities for Mechanical Engineers” |
24th August 2017 |
Dr. Sudhesh Bekal, Professor, NMAMIT, Nitte. |
NMAMIT, Nitte |
|
Technical Talk on “Constructive Innovation with new Devices” |
28th February 2018 |
Mr Pavananjaneya, Director,Friends,Vaneer and Ply,Managlore |
Vaneer and Ply,Managlore |
|
Technical Talk on “Control systems” |
18th April,2017 |
Dr Suma Bhat,Professor & Head of the Department, Department of Mechanical Engineering,Srinvas School of Engineering,Mukka,Mangaluru |
Srinvas School of Engineering,Mukka,Mangaluru |
|
One Day Industrial Visit for second year students |
11/10/2017 |
|
Lamina Foundry, Karkala |
|
One Day Industrial Visit for second year students |
04/09/2017 |
|
Udupi Power Corporation Limited,Padubidri |
Program Educational Objectives (PEO's):
1. Graduates will attain skills in Mechanical engineering in the universal disciplines of design, thermal and manufacturing engineering suitable for industry.
2. Graduates will be able apply fundamental technical knowledge and skills so as to discover practical solutions to technological challenges and problems in various areas of Mechanical Engineering.
3. Graduates will be trained practice Mechanical Engineering in a responsible, professional and ethical manner for the benefit of the engineering fraternity and society
Program Specific Outcomes (PSO's):
1. Graduates will be able to apply the acquired Mechanical Engineering knowledge for the advancement in technology and industry.
2. Graduates will be confident to implement the principles and concepts in Mechanical Engineering acquired through its study in estimating, designing and create more advanced mechanical systems or processes.
-
2017-18(volume 1/Issue 1)
-
2017-18(volume 1/Issue 2)
-
2018-19(volume 2/Issue 1)
-
2018-19(volume 2/Issue 2)
-
2019-20(volume 3/Issue 1)
-
2019-20(volume 3/Issue 2)
-
2020-21(volume 4/Issue 1)
-
2020-21(volume 4/Issue 2)
| Sr. No | Academic Year | Total Offers |
|---|---|---|
| 1 | 2017-18 | 23 |
| 2 | 2018-19 | 46 |
| 3 | 2019-20 | 30 |
| 4 | 2020-21 | 13 |
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)